- Other Power Supplies[1]
- Switching Power Supply[10]
- Transformers[1]
- Sensors[5]
- Ballasts[10]
- Dimmers[10]
- Contact Person : Mr. yuan George
- Company Name : Guangzhou Yoondon Lighting Electrical Co., Ltd.
- Tel : 86-020-28934226
- Fax : 86-020-84610677
- Address : Guangdong,Guangzhou,4049.No.46-56,Shia Qiao Guang Chang Xi Lu,Pan Yu District
- Country/Region : China
- Zip : 510400
T5 T8 LED tube Microwave motion dimmable sensor dimming Used in the parking lot
Related Product Searches:T5 T8 LED tube Microwave motion dimmable sensor dimming Used in the parking lot,High Quality,Sensor, dimmable sensor
Range of application&Functions and Features
Microwave motion dimmable sensor is the latest research and development of microwave intelligent lighting control . Its based Doppler principle and RADAR technology, adopting flat plane antenna & high
performance micro-chip.
It is easy to install, provide high probability of detection, low nuisance alarms and resistance to rain, fog,
wind, dust, falling snow and temperature extremes.
It can be applied to control various constant current, constant voltage LED lamps, further achieve high
performance green energy-saving.
It can be widely used in public places such as corridor, sidewalk,parking garage, warehouse and office
space etc.
Specification
1 | Voltage | 30V DC- 100V DC |
2 | Rated power | 60W (Max.) |
3 | Standby power | <0.9 W, Not include power supply |
4 | Detection area | 10%/30%/50%/80%/100%, adjustable |
5 | Hold time | 5s/15s/3min/5min/10min, adjustable |
6 | Standby Dimming level | 0%/5%/10%/30%/50%, adjustable |
7 | Microwave frequency | 5.8GHz +/-75MHz |
8 | Microwave power | <2mW |
9 | Detection range | 1-10 meters |
10 | Detection angle | 180° |
11 | Mounting height | Max 8m |
12 | Operating temperature | -35°C~+70°C |
13 | Working light | 2-2000lux, can be customized |
Wiring
Settings
Troubleshooting
Malfunction | Cause | Remedy |
The Load does not work | Wrong light control setting selected | Adjust setting |
The load work always | Continuous movement in the detection zone | Check zone setting |
The load work without any identifiable movement | Sensor not mounted for detecting movement reliably | Reinforcement install accessories |
Movement occurred, but not been identified by the sensor (movement behind wall, movement of a small object in immediate lamp vicinity etc.) | Check the induction space settings | |
The load will not work despite movement | The detection zone you have set is too small | Check the induction settings |
Packing
T5 T8 LED tube Microwave motion dimmable sensor dimming Used in the parking lot
